Make your own two-piece leather watch straps for 15 sizes in one download.

What you get

• Five lug widths, each with a matching taper: 16→14, 18→16, 20→18, 22→20 and 24→22 mm (lug → buckle).

• Three lengths per width. S is 70/110 mm (wrist ≈14.5–17 cm), M is 75/120 mm (≈16–19 cm) and L is 80/130 mm (≈17.5–20.5 cm).

• For every size: buckle TOP and LINING, tail TOP and LINING, and keepers.

• The marks show cut lines, spring-bar tunnel and buckle fold lines, and the buckle-tongue slot (2.5 × 8 mm). They also show stitch holes at a 3 mm pitch, 2.5 mm from the edge, and seven Ø3 mm adjustment holes.

• True-scale PDFs for A4 and US Letter, each with a 50 mm test square and a 2 × 1 inch box.

• 65 SVG pieces in real millimetres (1 unit = 1 mm) for Inkscape, Illustrator, Cricut or laser cutters.

• Instructions in English, 日本語, 한국어, 简体中文, Bahasa Indonesia, Türkçe and العربية. They cover leather thickness, tools, hardware, assembly and stitching.

Good to know

• Print at 100% / "Actual size", then measure the test square.

• These patterns were drafted digitally from standard strap dimensions. The seller has not sewn them as a physical prototype, so make one strap in scrap leather first and check the fit on your wrist. Wrist ranges are approximate.

• Commercial licence: you may make and sell finished straps (handmade, small batch). Please don't resell, share or upload the pattern files.

Pattern files created with the help of automated tools; scale checked digitally (50 mm test square = 50.0 mm in the PDF).