Introducing the Phone Stand V2, an open bridge-style stand designed for convenient charging without bending your cable. This geometrically closed and print-ready STL file offers a lightweight structure with excellent functionality.

Key features:

- Vertical mode: 64mm gap between side plates allows the charger to sit between them, with cable access from front or back.

- Phone elevation: bottom edge raised ~30mm from surface, enough for charging connector length.

- Horizontal mode: phone extends ~30mm on each side, charger can exit sideways freely, charging port faces any direction.

- Print economy: total volume ~59 cm³, approx. 35-45g with 15-20% infill (depends on printer settings). Lightening holes maintain strength while saving material.

- No supports needed if printed upright on its base.

- Dimensions: 90 x 92 x 100 mm, tilt angle 68°. Gap between lip and back ~14mm, fits phones with thin cases.

- Recommended print settings: PETG or PLA+, 0.2mm layer height, 3 walls, 15-20% infill.

Note: I have not test-printed this model yet. Please review the file in your slicer before printing. If your phone case is thick or you need adjustments to height or angle, contact me with your phone dimensions and I can modify the design.

This is a digital download. No physical item will be shipped. License: personal use only.