Five small, quick leather projects in one download. They are good for gifts, for craft-market stock, or for using up leather scraps.

What you get

• Passport cover: outer piece plus two sleeves. It is sized for a standard 125 × 88 mm passport booklet.

• 3-pocket card holder: back piece, two front pockets (one with a thumb notch) and one rear pocket. It fits standard 85.6 × 54 mm bank and ID cards.

• Key fob loop: folds around a 25 mm split ring. Both ends are stitched together, and there is an optional rivet mark.

• Pen sleeve: one piece, folded lengthwise. It fits pens up to about 11 mm in diameter.

• Cable strap: a single layer with marks for a snap at each end.

Files

• True-scale PDF patterns in both A4 and US Letter, landscape, 3 sheets each. Each one includes a 50 × 50 mm test square.

• Stitch holes are pre-marked at a 4 mm pitch, 3.5 mm from the edge, to match a standard 4 mm pricking iron. Pocket layers show a dashed guide line, so you punch the glued stack once.

• SVG file for every piece in real millimetres (1 unit = 1 mm), ready for Inkscape, Illustrator, Cricut or laser software.

• An instruction PDF covering leather thickness, tools, cutting, assembly and saddle stitching. It is written in English, 日本語, 한국어, 简体中文, Bahasa Indonesia, Türkçe and العربية.

Good to know

• Print at 100% / "Actual size", then measure the test square before you cut.

• These patterns were drafted digitally from standard card and passport dimensions. The seller has not sewn them as a physical prototype, so make a quick card-stock mock-up first and adjust for your leather thickness.

• Licence: you may sell the physical items you make. Do not resell or share the pattern files.

Pattern files created with the help of automated tools; scale checked digitally (50 mm test square = 50.0 mm in the PDF).